Chemicals and Adhesives

The two-component sealant contains resins and a catalyst for extremely durable anchoring in hollow, brittle or solid materials. It hardens within 6 minutes without expanding. The vinylester-based chemical anchor is resistant to water, moisture and immersion. Prevents corrosion. Durability 2,000 kg. ..

ARVA leave-in should not be missing from your workshop's equipment. It is a product designed to remove greasy dirt from the surface of the engine, engine compartment and underbody of the vehicle. It also cleans the plastic parts of the engine. It is also a suitable cleaning agent for tools and treat..

..

ARVA rinse aid should not be missing from your workshop's equipment. It is a product designed to remove greasy dirt from the surface of the engine, engine compartment and underbody of the vehicle. It also cleans the plastic parts of the engine. It is also a suitable cleaning agent for tools and trea..

Cleaning rinse aid to remove greasy dirt from the engine surface, engine compartment, and underbody. It also cleans the plastic parts of the engine. The sprayer is supplemented with a tube spray, which ensures precise application of the product to low-access areas. ARVA® creates a strong active emul..

- high final strength 180 kg / cm2 - Highly resistant to extreme conditions (high load, high forces, vibration, (sea) water, chemicals) - Metallic coloring - open processing time of 45 minutes - Final strength 180 kg / cm2 - resists (marine) water, oil, solvents, diluted acids and lye - Therma..

- High quality, very strong and hard 2-component adhesive epoxy sealant - specially designed for extreme and permanent repairs in humid environments and under water - Adhesive sealant has no deformation, corrosion and is resistant to chemical agents and temperatures from -40 ° C to +120 ° C - it can..

- high final strength 170 kg / cm2 - open processing time of 90 minutes - Resistant to water, moisture, oil, solvents, diluted acids and lye - Thermal resistance from -20 ° C to + 60 ° C - handling strength after 7 hours - curing after 24 hours - fill the jaws and cracks - after hardening, it can be..

- transparent, waterproof, strong adhesive for hard plastic bonding - the joint is made up of so-called Cold welding - Durable adhesive that can hold temperatures up to + 100 ° C - sticks to modern home synthetic materials: ABS (telephones, mobile phones, computers, power tools, hair dryers, etc...

- Adhesive designed primarily for repairing soft PVC products - Glue and repair directly under water - It consists of a contact polyurethane adhesive and a transparent soft PVC foil for light repairs - Resistant to temperatures from -15 ° C to + 70 ° C Suitable for bonding: - Soft PVC / Vinyl: ..

A total barrier ensures the impermeability of any surface, fills and repairs cracks and joints. Thanks to its unique technology, it creates a permanent elastic membrane, highly resistant to UV radiation and bad weather. The coating is suitable for everyday use and passing over the treated area. It a..

A two-component sealant in the form of a polyester-based chemical anchor that provides extremely durable anchoring in hollow, brittle or solid materials. It hardens within 6 minutes without expanding, so it is ideal for anchoring where there is a risk of cracking the surface. It is designed for fast..