Submersible pump Strend Pro MC900E, 900W, 18000 l/h, into dirty water, cable 10 m

Submersible drainage pump Strend Pro MC900E is designed for pumping clean, rain, but also muddy and dirty water with max. 5% of insoluble particles, which have a max. diameter 30 mm. You can also use it to pump chlorinated water from swimming pools and service water from tanks, wells and shafts. You will also appreciate his help in draining buildings during flooding. A pump of this type should not be used to pump drinking water, salt water, aggressive chemicals and water exceeding 35° C. A powerful motor with an input of up to 900 W ensures that the water flow through the pump can reach 18,000 l / h. The pump should be immersed to a maximum depth of 7 meters and can then provide a discharge of 8.9 m.

For proper operation, it is necessary to connect the pump to a 230 V power supply with a power cable that is 10 m long. If you are looking for a device that combines high quality and a good price, you have just found it. Thanks to its relatively low weight, you can comfortably handle it at your own manners. The Strend Pro MC900E pump is equipped with a float switch, which ensures that the pump is automatically switched off at a certain level of water so that the motor does not run dry. The pump tank should have a minimum size of 40 × 40 × 50 cm so that the float with the switch can move freely. The submersible pump is a maintenance-free, high-quality device that is subject to several output checks, has a degree of protection IP68 and insulation class B.