The Strend Pro MQ1000 submersible pump is a great helper when pumping clean, rain, service or chlorinated water. It will be used for draining flooded areas during floods, pumping tanks and swimming pools or pumping water from wells. It should not be used for pumping drinking water, salt water, aggressive chemicals or liquids with a temperature exceeding 35 ° C or if the diameter of the solid particles in the liquid exceeds 0.5 mm. The pump has a powerful motor with a power input of 1000 W, which is powered by electricity from a source with a voltage of 230 V. You connect the pump to the connection using a power cable that is 10 m long.
The pump provides a flow of 6,500 l of water per minute and a maximum discharge of 33 m. The maximum recommended immersion depth is 7 m. The submersible pump is equipped with an integrated float, therefore the pump tank should have a minimum size of 40 × 40 × 50 cm so that the float with the switch can move freely. The submersible pump is switched on automatically by the integrated float switch. For your maximum safety, the submersible pump contains a discharge-preventing plug, meets IPX8 degree of protection, as well as class F insulation.
| Default | |
| Max. transportation height | 33 m |
| Type of accessory | other accessories |
| Max. particle diameter | 0,5 mm |
| Input | 1 000 W |
| Insulation class | F |
| Max. temperature of the pumped liquid | 35°C |
| The length of the power cable | 10 m |
| Hose connection | 1" 1-1/2" |
| Max. depth of immersion | 7 m |
